Homebrew 21 MHz 4e Beam Part #1

Months ago I ordered some aluminium in preparation for another antenna project.  Wtih the assistance of John M0UKD the plan was to build a 21 MHz 4E Yagi. The aluminium was ordered from aluminium warehouse, and cost around £100 including delivery.

WM_20150504_190640   WM_20150504_191110

The on-line shop provides and delivers lengths of up to 5 meters, and they have a vast selection of grades and lengths available.

The design was by DK7ZB and was chosen because of the short boom length and high gain. The boom is 5 meters, and made from 40mm box split into 2 x 2.5m.  The reflector is 7.2 meters long and director 2 is 6.4 meters long (to give you some scale) You will find all the measurements, VSWR and gain data on Martin’s very extensive website.

The antenna construction involves sections of the elements telescoping into each other, and Martin points out this is a critical part of the design. The aluminium was ordered with this in mind, and while some sections required no adjustment others didnt quite go to plan. We needed to “grind” some of the sections just a little, to ensure they would fit and telescope correctly. This part of the construction required 1 complete grinding disc and around 2 Hrs. work !

WM_P1010119

Once each section that required attention was ground down, the elements were mounted on the boom. I used various places to source all the parts but some on-line resources have been linked.

As with any home construction project you always get some unexpected challenges, the first was how to get the elements to lay flat on the plastic formers. The former needs to be mounted to the boom by a nut, and this isnt easy to recess, meaning we had to cut a small hole to locate the nut into the element, allowing the element to lay flat.

WM_P1010125

With this type of beam it presents 28? (by design) and so requires a coax matching section. This is yet to be constructed, but the final build phase will include this and mounting the driven element.

You can see the progress so far, and further updates and pictures will be posted once tested.

73 Dave M0TAZ
   WM_20150504_185439

About M0TAZ

Dave enjoys all aspects of the hobby from contesting in a wet cold field (OK enjoys is a bit strong) to building beams and working big DX. Portable VHF and HF can provide lots of opportunity to try new things, test out antenna and enjoy a field day based curry.
This entry was posted in Antennas, Portable and tagged , , , , , . Bookmark the permalink.